How to store stainless steel wire mesh

1, stored in a dry and well ventilated room or room with temperature and humidity control (preferably room temperature 25 degrees, 50 degrees humidity). Prohibit the exposure to high temperature and humidity confined space, and to avoid acid, alkali, salt and other materials stored together.

2, If the stainless steel surface bleach and a variety of acid attached, immediately rinse with water, and then ammonia solution or neutral aqueous solution of carbonated water immersion, washing with neutral detergent or warm water. Stainless steel surface dust and easy to get rid of dirt, available soap, weak detergent or warm water washing. Therefore, the surface of the stainless steel mesh must be regularly cleaned and serviced to maintain its shiny surface and extend the service life.

3, cleaning the stainless steel mesh surface must pay attention to the phenomenon of surface scratches can not occur, to avoid the use of bleaching ingredients and abrasive washing liquid, steel balls, grinding tools, in order to get rid of the washing liquid, wash the surface and then rinse the surface with clean water . Stainless steel surface passivation film in the weak corrosion resistance of the site, due to self-excited reaction to form a pitting reaction, the formation of small holes, coupled with chloride ions close to form a strong corrosive solution, accelerate the corrosion reaction rate Very bad for stainless steel. There are intergranular corrosion cracking in the interior of the stainless steel, all of these damaging the passive film on the stainless steel surface.

   

Equipment